Behringer FBQ6200HD 31-Band Stereo Graphic EQ - Nearly New

Full Description

The sound you deserve

No matter where you are or what equipment you're using, you want to ensure that noise is kept to an absolute minimum. And with the Behringer FBQ6200HD, you don't have to worry about noise at all. This high-performance graphic EQ utilises Behringer's superior German engineering and high-quality components, including industry-leading 4580 operational amplifiers. These are uses throughout the FBQ6200HD, providing you with maximum signal integrity across the entire audio spectrum.

You can utilise this powerful 31-band equaliser as a powerful stereo FoH EQ to maximise the sound of your PA system, or you can take advantage of its dual-channel design and use one side for the FoH speakers, and the other to EQ your monitors. No matter how you use it, the FBQ6200HD is the perfect way to maximise your performance in any venue or studio environment.

Destroyer of feedback

For more than 20 years, Behringer has designed and manufactured some of the most successful FBQ Feedback Elimination processors. Now you can own and enjoy the benefits of this innovative technology thanks to the integration of Behringer's revolutionary FBQ Feedback Detection System. Ensuring that your sound is completely feedback-free, the FBQ6200HD allows you to focus on your performance. When feedback is detected, the FBQ6200HD indicates the specific frequency range via an LED on the associated EQ band, so you know exactly which band to adjust to get rid of that dreaded feedback.

Integrated tools for professional performance

The FBQ6200HD is a swiss army knife for anyone who creates recordings or puts on live shows. Loaded with a vast array of special tools and features for optimising your sound, you can utilise the FBQ6200HD for a wide variety of applications. Each channel is equipped with ultra-precise variable high and low-cut filters, complete with a sweepable frequency that allows you to remove non-essential bass content. You can do away with floor rumble, room resonance, electrical hum, and more, and in turn help to increase the headroom of your power amp. The end result is a fine-tuned overall sound, letting you deliver crystal-clear dynamic sound with a tight, punchy low-end.

But that's not all. The FBQ6200HD also features an integrated crossover. A dedicated subwoofer output with an adjustable cut-off frequency (variable from 30Hz to 200Hz) complete with balanced XLR outputs for connecting you power amps or active subwoofers lets you get connected without any additional hardware. Perfect for a wide variety of system configurations.

Features

• Audiophile-grade 31-band stereo graphic equaliser for live and studio applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as an audio analyser
• Ultra-low-noise 4580 operational amplifiers provide the highest signal integrity
• Dedicated limiters with gain reduction meters for each channel protect your system from overload and distortion
• Pink noise generator provides test signals to adapt your sound system to any room acoustics
• Mono subwoofer output with dedicated level control and adjustable crossover frequency
• Additional sweepable high and low-cut filters for each channel remove unwanted frequencies from floor rumble, hiss, and more
• Highly-accurate 8-segment LED input/output metering and input gain controls for easy level setting
• Relay-controlled hard bypass with an auto-bypass function during power failure (fail-safe relay)
• Servo-balanced inputs and outputs with 1/4'' TRS and gold-plated XLR connectors
• 'Planet Earth' switching power supply for maximum flexibility, noise-free audio, superior transient response, and low power consumption
• Covered by Behringer's 3-year warranty program
• Designed and engineered in Germany

Specifications

• Inputs: RF-filtered, servo-balanced XLR and 1/4'' TRS connectors
  • Impedance: 40k Ohms balanced and unbalanced
  • Maximum Input Level: +21dBu balanced and unbalanced
  • CMRR: Typ. 55dB, greater than 40dB at 1kHz
• Outputs: Servo-balanced XLR and 1/4'' TRS connectors
• Subwoofer Out: Balanced XLR connector, level variable (off to 0dB)
  • Crossover Frequency: Variable, 30Hz - 200Hz
• Frequency Response: 10Hz to 30kHz, +/-3dB
• S/N Ratio: 22Hz to 22kHz greater than 94dB at +4dBu
• THD: Typ. 0.008-pecent at +4dBu, 1kHz, gain 1
• Crosstalk: Typ. -89.5dB at 1kHz
• Roll-Off Filter Type: 12dB/oct, Butterworth
  • Input: +/-15dB, variable
  • Low Cut: 10Hz to 400Hz, variable
  • High Cut: 2.5kHz to 30kHz, variable
• EQ Type: Analog 31-band EQ
  • Frequency Range: 20Hz to 20kHz in 31 x 1/3-octave bands (ISO frequencies)
  • Bandwidth: 1/3 octave
  • Control Range: +/-6dB or +/-12dB (switchable)
• Limiter:
  • Attack/Release: 20ms / 90ms
  • Threshold: -6dB to +22dB (off), variable
  • LED Meter: Gain reduction, 20/10/3/1dB
• Noise Generator: Pink noise, off to 0dBu, variable (-24/-12/-6/0dB LED level meter)
• Function Switches:
  • FBQ: Activates the FBQ Feedback Detection System
  • Audio In/Out: Switch to bypass the EQ functions
  • I/O Meter In/Out: Switches the meter display from input to output
  • Range: Shifts the maximum cut/boost range for all 31 bands
  • Limiter: Activates the limiter
  • Pink Noise: Activates the noise generator
  • Subwoofer: Activates the subwoofer output
• Input/Output Level Indicators: 8-segment LED display (-24/-18/-12/-6/0/+6/+12dB/CLIP)
• Subwoofer Indicators: 4-segment LED display (-18/-12/0/+12dB)
• Power Supply: 100-240V, 50/60Hz
• Fuse: T 1.6 A H 250 V
• Power Consumption: 35W
• Mains Connection: Standard IEC receptacle
• Dimensions: 133mm x 483mm x 138mm / 5.2'' x 19.2'' x 5.4'' (H x W x D)
• Weight: 2.3kg / 5.1lbs
• Product Code: FBQ6200HD