Markbass Little Mark 500w Tube Bass Amp Head - Nearly New

Full Description

On the front panel there are two inputs with separate gain controls: one 1/4" jack, and one combo jack that accepts either an XLR or a 1/4" cable. Additional features include switchable 48V phantom power for the XLR input, solid-state/tube mix control, four bands of EQ, VLE and VPF filters, line out level control, pre-post EQ switch for the XLR out (on rearpanel), and mute control (push-pull on the master knob).

Inputs

• Input 1: impedance 500 Kohm, max. voltage 15 Vpp
• Input 2 (Balanced XLR/1/4" combo): balanced, impedance 500 Kohm, max. voltage 15 Vpp, phantom power 48V
• Effect Return: impedance 33 Kohm, max. voltage 10 Vpp

Controls

• Gain 1: -60 dB to +23 dB range
• Gain 2: -60 dB to +23 dB range
• Mix: mixes tube and solid state gain
• Master Volume: Line Out Level
• Ground Lift: switch on rear panel
• Pre/Post EQ: switch on rear panel
• Mute: push/pull on master knob

Equalisation

• Low: center frequency: 60 Hz; level: ±16 dB
• Low Mid: center frequency: 360 Hz, level: ±16 dB
• High Mid: center frequency: 800 Hz, level: ±16 dB
• High: center frequency: 5 kHz, level: ±16 dB
• VPF (Variable Pre-shape Filter): center frequency 380 Hz (cut)
• VLE (Vintage Loudspeaker Emulator): frequency range 250 Hz-20 kHz (cut)

Output

• Line Out: balanced XLR, max. voltage 20 Vpp
• Effect Send: unbalanced, max. voltage 20 Vpp (pre-EQ)
• Tuner Out: unbalanced, max. voltage 2 Vpp
• Speaker Out: speakon/1/4" combo, 1/4"

Other

• Weight: 6.55 lbs / 2.97 kg
• Output Power: 300W RMS @ 8 ohm, 500W RMS @ 4 ohm